The Science of Starch and Sugar in Cooking
Starch and Sugar: Four Changes to Know
Every time you stir a white sauce, chill a custard or toast a slice of bread, carbohydrates are changing in your pan. The specification names three functional properties of carbohydrates: gelatinisation, dextrinisation and caramelisation. Gelation, setting a mixture by removing heat, is also part of the sauces and setting skills. These four words sound alike, so students often mix them up. This lesson explains the science behind each one and links it to a technique you will use in the kitchen. Learn the science and you can explain why a dish worked, and why it failed.
Gelatinisation = starch + liquid + heat → a thickened sauce. Gelation = a starch mixture setting as it cools. Dextrinisation = starch + dry heat → browning. Caramelisation = sugar + heat → browning.
Gelatinisation: How a Sauce Thickens
Starch is stored in tiny packets called granules. Raw starch granules do not dissolve in cold liquid. They just float about. When you heat starch in a liquid, the granules absorb water and swell. Gelatinisation begins at roughly 60 °C. As the temperature rises towards boiling, the swollen granules burst. They release starch molecules (amylose and amylopectin) into the liquid. These long molecules tangle together and trap water. The liquid becomes thicker. We say its viscosity has increased.
Heat reaches the sauce in two ways. First, conduction carries heat from the hob, through the metal base of the pan, into the liquid touching it. Second, convection spreads that heat. Hot liquid at the bottom rises and cooler liquid sinks to take its place. These convection currents move heat through the whole pan.
Convection alone is not enough. Starch granules are heavier than the liquid, so they sink to the hot base of the pan. That is why the specification stresses the need for agitation. Stirring keeps the granules spread out, so each one swells on its own. It also stops starch sticking and burning on the base, and it spreads the heat evenly. Stop stirring and you risk lumps and a scorched taste.
The liquid:starch ratio controls viscosity. More starch for the same liquid gives a thicker sauce. Less starch gives a thinner, pouring sauce. Changing the ratio is how a cook makes a sauce thick enough to coat the back of a spoon, or thin enough to pour.
Three Ways to Make a Blended Sauce
A blended white sauce relies on gelatinisation. In a roux, you melt fat, stir in flour and cook it briefly. Then you add the liquid gradually while stirring. The fat coats each starch granule and keeps them apart. In an all-in-one sauce, cold milk, flour and fat go into the pan together. The mixture is whisked constantly as it heats, so the granules stay separate. An infused sauce, such as a béchamel, uses milk that has been heated with flavourings first. A velouté uses stock instead of milk. The method changes, but the science is the same: starch, liquid, heat and stirring.
Lumps form when starch granules clump together before they gelatinise. If you tip flour straight into hot liquid, the outside of each clump gelatinises at once. It forms a sticky skin that traps dry flour inside. Stirring cannot break it up. The fixes all keep granules apart: coat them in fat first (a roux), mix them with cold liquid first (all-in-one), add liquid slowly, and keep stirring. If lumps do form, the sauce can be whisked hard or passed through a sieve.
Reduction Sauces: Thickening by Evaporation
Not every sauce is thickened with flour. A reduction sauce, such as a pasta sauce, curry sauce, gravy or meat sauce, is simmered uncovered. Water turns to steam and escapes. The flavour compounds do not evaporate as easily, so they stay behind in less liquid. This is how evaporation concentrates flavour. With less water left, the sauce also becomes thicker, so its viscosity changes. A meat sauce made with a meat alternative, such as mycoprotein or textured vegetable protein, reduces in exactly the same way.
A reduction sauce thickens because water evaporates, not because starch gelatinises. Evaporation concentrates the flavour and increases the viscosity. Leaving the lid off speeds this up.
Gelation: Setting on Chilling
Gelation happens after gelatinisation, when heat is removed. As a hot, thickened starch mixture cools, the starch molecules bond more tightly and form a firm network. Water is trapped inside the network, so the mixture sets into a gel. The specification links this to layered desserts such as custard or cheesecake. A custard layer must be thick enough to set firm in the fridge, or the layer above sinks into it. This is why the liquid:starch ratio matters again: too little starch and the dessert will not hold its shape.
They sound similar, but they happen at opposite ends of the process. Gelatinisation needs heat: granules swell and burst, and the liquid thickens. Gelation needs heat to be removed: the thickened mixture sets as it chills. Gelatinisation happens in the pan. Gelation happens in the fridge. You cannot have gelation without gelatinisation first.
Browning: Dextrinisation and Caramelisation
Dextrinisation needs dry heat, with no liquid. The heat breaks long starch chains into shorter pieces called dextrins. These are brown and taste slightly sweeter. You see dextrinisation on toast, on the crust of bread, and on a crisp crumb topping. The specification lists it as a way to change texture and flavour, by adding a crust, crisp or crumbs.
Caramelisation is browning of sugar, not starch. When sugar is heated strongly, it melts and turns golden, then deeper brown, with a rich, bitter-sweet flavour. Onions slowly fried until golden and sweet, or a sugary glaze on a tart, show caramelisation. Heat it too far and the sugar burns and tastes bitter.
Both kinds of browning improve the sensory properties of food: colour, flavour, aroma and texture. To tell them apart, ask two questions. Is it starch or sugar? Is the heat dry? Starch in dry heat is dextrinisation. Sugar heated strongly is caramelisation. Starch in liquid is gelatinisation, which thickens rather than browns.