Geomorphic Processes: Weathering to Deposition
What Physical Processes Shape Landscapes?
Every cliff, beach, waterfall and floodplain in the UK was made by geomorphic processes. These processes work as a chain. Weathering weakens and breaks rock. Mass movement moves loose material downhill. Erosion wears the land away. Transport carries the material somewhere else. Deposition drops it. The same five groups shape both coastal landscapes and river basins. The only difference is what does the work: waves at the coast, flowing water in a river.
The specification lists five groups of geomorphic processes: weathering (mechanical, chemical, biological), mass movement (sliding, slumping), erosion (abrasion, hydraulic action, attrition, solution), transport (traction, saltation, suspension, solution) and deposition.
Weathering
Weathering is the breakdown of rock where it is. Nothing is carried away. Weathering prepares rock for the other processes by making it weaker and looser. There are three types to learn.
Mechanical weathering breaks rock into smaller pieces without changing what it is made of. The key example is freeze–thaw weathering. Water seeps into a crack. At night it freezes and expands by about 9%, pushing the crack wider. In the day the ice melts and more water gets in. After many cycles, pieces of rock break off. This is common on UK cliff tops and upland valley sides in cold winters.
Chemical weathering changes the chemical make-up of the rock. Rainwater is slightly acidic. In carbonation, this weak acid slowly dissolves rocks such as limestone and chalk, widening joints and cracks.
Biological weathering is caused by living things. Plant roots grow into cracks and force them apart as they thicken. Burrowing animals dig into soft rock and soil, loosening it. On a river bank or cliff top, both can weaken the ground.
Students often mix these up. Ask one question: does the material move? Weathering breaks rock down in place. Erosion wears rock away and removes it, using moving water, waves or the sediment they carry. Freeze–thaw on a cliff top is weathering. Waves hurling pebbles at the cliff base is erosion. The two often work together: weathering weakens the cliff, then erosion removes the loosened rock.
Mass Movement
Mass movement is the downhill movement of rock and soil under gravity. It usually happens after weathering has loosened material, or after heavy rain has made the ground heavy and slippery. The specification names two types.
Sliding is when a block of rock or soil moves down a slope in one piece along a fairly straight surface. Rainwater soaking into the ground can act like a lubricant along a weak layer. Sliding can happen on cliffs and on steep river valley sides.
Slumping is when soft, saturated material such as clay moves down along a curved surface. The block rotates as it slips, leaving a stepped or terraced slope. The soft boulder clay cliffs of the Holderness coast in East Yorkshire are a well-known UK example. On rivers, slumping can happen on steep banks undercut by the flow.
Sliding moves material in a block along a straight surface. Slumping moves soft, saturated material along a curved surface, so the block rotates and leaves a stepped slope.
Erosion
Erosion is the wearing away of land by moving water. At the coast, waves do the work. In rivers, the flowing water does. Erosion is strongest when energy is highest: during storms at the coast, when large waves with powerful backwash pound the cliffs, and during floods in a river, when there is far more water moving quickly. There are four erosion processes, and each one works at both the coast and in rivers.
Hydraulic action. The sheer force of water hits the rock. At the coast, waves force air into cracks. The air is squeezed, then expands as the wave pulls back, weakening the rock over time. In a river, fast water forces its way into cracks in the bed and banks.
Abrasion. Water picks up sand, pebbles and stones and throws or scrapes them against the rock, wearing it away like sandpaper. At the coast this attacks the cliff base. In a river, the load grinds the bed and banks.
Attrition. Pieces of rock carried by the water knock against each other. They break into smaller pieces and become smoother and rounder. Attrition does not attack the cliff or the river bank — it changes the sediment itself.
Solution. Slightly acidic water dissolves certain rocks, such as limestone and chalk. It is slow, but it steadily widens cracks in cliffs and river beds.
Transport
Transport is the movement of eroded material, called the load. How it moves depends on the size of the material and how much energy the water has. There are four transport processes:
- Traction — large boulders and stones are rolled along the river bed or sea bed. This needs the most energy.
- Saltation — small pebbles and stones bounce along the bed.
- Suspension — fine particles such as silt and clay are carried along in the water. This is why rivers in flood look brown.
- Solution — dissolved minerals are carried along invisibly in the water.
Solution appears twice in the specification. As an erosion process it means water dissolving rock. As a transport process it means carrying dissolved minerals along in the water.
At the coast, waves also move sediment sideways along the shore by longshore drift. Waves arrive at an angle, so the swash carries sediment up the beach diagonally. The backwash then pulls it straight back down under gravity. Over time, material zigzags along the coast.
Deposition
Deposition happens when water loses energy and can no longer carry its load. At the coast, this happens in sheltered bays and where low, gentle waves with a strong swash push material up the beach. In rivers, deposition happens where the flow slows down: on the inside bend of a meander, on the floodplain when a river floods, and where a river meets the sea.
The heaviest material is dropped first because it needs the most energy to carry. Boulders and pebbles settle where energy is still fairly high. Fine silt and clay are carried furthest and settle in the calmest water.
Deposition happens when water loses energy. The largest, heaviest material is dropped first; the finest material is carried furthest.
Geology is the type of rock. Hard, resistant rock erodes slowly. Soft rock such as clay erodes quickly and is prone to slumping. Limestone and chalk are open to solution and carbonation. Cracks and joints in any rock give hydraulic action and freeze–thaw somewhere to attack.
Climate controls how often and how strongly processes act. Cold winters with frequent frosts increase freeze–thaw. Heavy rain saturates cliffs and banks, triggering sliding and slumping, and raises river levels so erosion and transport increase. Storms bring powerful waves that speed up coastal erosion. Your coastal and river case studies need to show how geology and climate influence the processes in those places.
From Processes to Landforms
These processes rarely work alone. On a cliff, weathering loosens the top, waves erode the base, mass movement brings material down, and transport and deposition move it along the shore. In a river, erosion upstream supplies the load that is later deposited downstream. Understanding the chain is the key to explaining how coastal and river landforms form.