StudyVault
Home Unit Overview Revision Techniques Previous Lesson Next Lesson

Back to Home

Page tint:
0:00 / 0:00

Coastal Landforms & the Dorset Coast

What Makes a Coast Distinctive?

This lesson tackles the enquiry question What influences the landscapes of the UK? for coasts. Three things shape every coastline: its geology, its climate and human activity. In the last lesson you met the geomorphic processes: weathering, mass movement (sliding and slumping), erosion (hydraulic action, abrasion, attrition and solution), transport and deposition. Here you will see how those processes build landforms. Then you will apply them to a case study: the Dorset coast. If your class studied a different UK coastal landscape, that is fine. The same structure works for any coast.

Headlands and Bays

Rock type controls how fast a coast erodes. On a discordant coast, bands of hard and soft rock meet the sea at right angles. The soft rock erodes quickly and is cut back into curved bays. The hard rock resists erosion and is left sticking out as a headland. On a concordant coast, the rock bands run parallel to the sea. This gives a straighter coastline, because the same rock faces the waves all the way along.

Once headlands form, they stick out into deeper water and take the full force of the waves. The bays between them become sheltered, with lower wave energy. So headlands are mainly places of erosion, while bays are mainly places of deposition.

Caves, Arches and Stacks

Even hard rock has weaknesses, such as cracks and joints. Waves find these weak points and attack them. Over a very long time, a headland is worn down through a chain of landforms. Each stage leads to the next, so learn it as a sequence.

1. Crack. Hydraulic action forces water and air into a joint in the headland. Abrasion, as waves throw rocks at the cliff, widens the crack.

2. Cave. Continued erosion enlarges the crack into a cave at the base of the cliff.

3. Arch. The cave is eroded right through the headland, making an arch. Durdle Door in Dorset is a famous example.

4. Stack. Waves erode the base of the arch while weathering attacks its roof. The roof gets thinner until gravity makes it collapse. This leaves a tall pillar of rock cut off from the land: a stack. Old Harry Rocks in Dorset are stacks.

5. Stump. Waves keep attacking the base of the stack until it collapses, leaving a low stump that may only show at low tide.

Key Fact

The headland erosion sequence is crack → cave → arch → stack → stump. Durdle Door is an arch and Old Harry Rocks are stacks, both on the Dorset coast.

Beaches and Spits

Deposition happens when waves lose energy and drop the sediment they carry. This usually happens in sheltered bays, building a beach. Where wave energy is low, fine sand is dropped. Where wave energy is higher, only larger pebbles and shingle stay behind.

Sediment does not just sit still. It moves along the coast by longshore drift. The swash carries sediment up the beach at an angle, in the direction of the prevailing wind. The backwash then drags it straight back down the slope under gravity. Step by step, sediment zig-zags along the shore. Along the way it is transported by traction, saltation, suspension and solution.

Where the coastline suddenly changes direction, such as at a river mouth, longshore drift keeps carrying sediment in its original direction. The sediment builds out into the sea as a spit. Changes in wind and wave direction can curve the end of the spit, giving it a recurved end. Behind the spit, the water is sheltered. Mud and silt settle there and a salt marsh develops. Spurn Head, which stretches into the Humber Estuary, is a well-known UK spit.

Key Fact

A spit forms when longshore drift carries sediment past a sudden change in the direction of the coastline. Its end can curve, and a salt marsh forms in the sheltered water behind it.

Case Study: The Dorset Coast

The Dorset coast sits on the south coast of England. It is part of the Jurassic Coast World Heritage Site. It is a perfect case study because it shows landforms at different scales. At a large scale, whole bays and headlands stretch for kilometres. At a small scale, waves widen single cracks in cliffs. It also shows clearly how geology, climate and people work together.

The discordant east. Around Swanage, the rock bands meet the sea at right angles. Hard chalk forms the headland at Old Harry Rocks. Softer Bagshot sands have been eroded into Studland Bay. Weak Wealden clay has been worn back into Swanage Bay. Further south, harder limestone forms the headland of Durlston Head.

The concordant west. Around Lulworth, the rock bands run parallel to the sea. A band of hard Portland limestone faces the waves. Where the sea broke through this band, it quickly eroded the softer clays behind. Erosion slowed when it reached the hard chalk at the back. The result is the almost circular Lulworth Cove. Nearby, the arch of Durdle Door is cut into Portland limestone.

How Climate Shapes the Processes

Climate controls how hard the processes work. The prevailing winds blow from the south-west, so waves drive in from that direction and power longshore drift. Winter storms bring powerful destructive waves that erode cliffs fastest. Heavy rain soaks the clay cliffs, making them heavier and weaker, so they slump. On exposed rock faces, weathering loosens material that the sea can then remove.

Key Fact

Dorset shows both coast types. The Swanage area is discordant, with chalk and limestone headlands and clay and sand bays. The Lulworth area is concordant, where the sea broke through limestone to form Lulworth Cove.

Human Activity and Management

Swanage. The town is built in a bay of soft clay, so it needs protecting. It uses hard engineering. A sea wall reflects wave energy away from the seafront. Groynes trap sand carried by longshore drift, keeping a wide beach that absorbs wave energy and attracts tourists.

Studland. Studland Bay has sand dunes that attract many visitors. Trampling kills the plants whose roots hold the sand together. The National Trust uses soft engineering, such as fencing, boardwalks and replanting, to protect the dunes.

Lulworth and Durdle Door. These landforms are tourist hotspots. Large numbers of walkers erode the footpaths on the cliffs, so paths have been surfaced and routes marked to limit damage.

People do not stop geomorphic processes. They change where and how fast those processes act. Groynes interrupt longshore drift, so sand builds up on one side. But less sediment then moves further along the coast, so beaches there can become narrower and less protected. When trampling removes dune plants, the wind can blow sand away much faster than before.

This is why the specification asks how human activity works in combination with geomorphic processes. Good answers show both working together, not one replacing the other.

Key Fact

Swanage uses hard engineering (a sea wall and groynes). Studland uses soft engineering to protect its dunes. Management changes where and how fast processes act, rather than stopping them.

Exam question

AI feedback
This is a guide, not an exam mark. If your teacher marks it differently, go with your teacher.

Next lesson Back to unit
Explainer