StudyVault
Home Unit Overview Revision Techniques Previous Lesson Next Lesson

Back to Home

Page tint:
0:00 / 0:00

Plate Tectonics: Structure, Movement & Boundaries

How Do Plate Tectonics Shape Our World?

Earthquakes and volcanoes are not random. Most happen in narrow bands across the planet, where huge slabs of rock meet. To explain why, you need three ideas: what the Earth is made of, what makes its surface move, and what happens where pieces of that surface meet. This lesson builds each idea in turn. It finishes with the different types of earthquake and volcano these processes create.

The Structure of the Earth

The Earth has four main layers. At the centre is the inner core, a solid ball of iron and nickel. Around it is the outer core, which is liquid. Next comes the mantle, the thickest layer. Its rock is semi-molten, so it can flow very slowly over long periods of time. On the outside is the crust, a thin, rocky shell. The crust is broken into large pieces called tectonic plates.

There are two kinds of crust, and the difference matters. Oceanic crust lies under the oceans. It is thinner but denser. Continental crust forms the land. It is thicker but lighter. When the two meet, the denser oceanic crust sinks. Keep this in mind — it explains a lot of what follows.

Key Fact

The Earth has four layers: solid inner core, liquid outer core, semi-molten mantle and rocky crust. Oceanic crust is thinner and denser; continental crust is thicker and lighter.

What Makes Plates Move?

Plates move only a few centimetres a year — about as fast as your fingernails grow. Over millions of years, though, that movement opens oceans and builds mountains. Two forces drive it, and both depend on gravity.

Slab pull happens where an oceanic plate sinks into the mantle. The sinking edge is cold and dense, so gravity pulls it down. As it sinks, it drags the rest of the plate behind it, like a tablecloth sliding off a table once one end hangs over the edge.

Ridge push happens at mid-ocean ridges, where new crust forms. Fresh crust here is hot and sits higher than the ocean floor around it. Gravity makes this raised crust slide away from the ridge, pushing the plate outwards.

Many geologists think slab pull is the stronger force. Plates with a long sinking edge tend to move faster than plates without one. Ridge push still matters, because it starts plates moving away from ridges. The two forces work together: one end of a plate is pushed from a ridge while the other end is pulled down into the mantle.

Plate Boundaries and Hotspots

A plate boundary is where two plates meet. Your course names four types of boundary, plus hotspots, which sit away from boundaries. Each one has its own processes and its own hazards.

Constructive boundaries

At a constructive boundary, two plates move apart. Magma rises into the gap, cools and forms new crust. The Mid-Atlantic Ridge runs down the Atlantic Ocean and is widening by about 2 cm a year. Iceland sits right on top of it. Eruptions here are gentle, with runny lava, and earthquakes are usually small and shallow.

Destructive boundaries

At a destructive boundary, an oceanic plate moves towards another plate. The denser oceanic plate is forced down into the mantle. This is called subduction. Friction makes the plates stick, then jolt free, causing powerful earthquakes. The sinking plate melts, and the magma rises to form explosive volcanoes. The Andes in South America formed where the Nazca Plate sinks beneath the South American Plate.

The sinking oceanic plate carries water and trapped gas down with it. As the plate melts, this water and gas mix into the magma. The magma is forced upwards under huge pressure. When it reaches the surface, the gas escapes violently. Mount St Helens in the USA erupted this way in 1980, blasting out the side of the mountain.

Collision boundaries

At a collision boundary, two continental plates push together. Both are too light to sink, so neither is subducted. Instead, the crust crumples and folds upwards into mountains. The Himalayas formed where India pushes into Eurasia at about 5 cm a year. Strong earthquakes shake places like Nepal, but there are no volcanoes, because no plate sinks and melts.

Conservative boundaries

At a conservative boundary, two plates slide past each other. Crust is neither made nor destroyed. The plates lock together through friction until stress builds up, then they slip suddenly in an earthquake. The San Andreas Fault in California is the classic example: the Pacific Plate slides past the North American Plate at about 5 cm a year. There are no volcanoes here.

Hotspots

A hotspot is different because it is not at a boundary at all. A plume of very hot magma rises from deep in the mantle and burns through the crust in the middle of a plate. The plume stays still while the plate moves over it. Over time this creates a chain of volcanoes, oldest at one end and newest above the plume. The Hawaiian Islands, in the middle of the Pacific Plate, formed this way.

Key Fact

Volcanoes form where magma reaches the surface: at constructive boundaries, destructive boundaries and hotspots. Collision and conservative boundaries produce earthquakes but no volcanoes, because no plate sinks and melts.

Earthquakes: Shallow and Deep Focus

The point underground where an earthquake starts is the focus. The point on the surface directly above it is the epicentre. Shaking is usually strongest near the epicentre.

Shallow-focus earthquakes start near the surface, in roughly the top 70 km of the Earth. Their energy has less rock to travel through, so shaking at the surface is often more damaging. They happen at all boundary types. Deep-focus earthquakes start hundreds of kilometres down. They happen mainly at destructive boundaries, along the sinking plate as it descends into the mantle. Much of their energy is lost before it reaches the surface, so they often cause less damage.

Volcanoes: Shield and Composite

Shield volcanoes are wide with gentle slopes. They are built from runny lava that flows a long way before it cools. Eruptions are frequent but gentle. They form at hotspots, such as Hawaii, and at constructive boundaries, such as Iceland.

Composite volcanoes are steep, cone-shaped mountains. They are built from layers of ash and sticky lava that cools quickly near the vent. Gas gets trapped, so eruptions are less frequent but explosive. They form at destructive boundaries — Mount St Helens is a composite volcano.

Key Fact

Shield volcanoes have gentle slopes, runny lava and gentle eruptions (hotspots and constructive boundaries). Composite volcanoes are steep, with ash and sticky lava, and erupt explosively (destructive boundaries).

Exam question

AI feedback
This is a guide, not an exam mark. If your teacher marks it differently, go with your teacher.

Next lesson Back to unit
Explainer