StudyVault
Home Unit Overview Revision Techniques Previous Lesson Next Lesson

Back to Home

Page tint:
0:00 / 0:00

Nepal 2015 & Technology That Saves Lives

The Enquiry: How Can Tectonic Movement Be Hazardous?

Plate movement is a natural process. It only becomes a hazard when it threatens people and property. This lesson answers two enquiry questions. First, how was one tectonic event hazardous for people? We use the Nepal earthquake of 2015 as our case study, looking at its causes, consequences and responses. Second, how can technology save lives in hazard zones? We look at building design, prediction and early warning systems, using Japan as an example of an advanced country (AC) and Nepal as a contrast.

What Happened in Nepal?

On 25 April 2015, a magnitude 7.8 earthquake struck Nepal just before midday. The epicentre was about 80 km north-west of the capital, Kathmandu. The shaking lasted around fifty seconds. Nepal is a low-income developing country (LIDC), so it had fewer resources to prepare for, or recover from, a disaster on this scale.

Causes: The Physical Trigger

Nepal sits on a collision boundary. Here the Indian Plate is being driven into the Eurasian Plate. This is the same collision that built the Himalayas. As the plates push together, pressure builds up in the rocks. When the rocks suddenly slip, that stored energy is released as an earthquake. Remember that a collision boundary is not the same as a destructive boundary. At a collision boundary, two continental plates meet and neither sinks beneath the other.

The physical trigger explains why the ground shook. It does not explain why so many people died. Human factors made Nepal vulnerable. Many homes were built from brick and mud-mortar, which collapsed under the shaking. Mountain villages were remote and hard to reach. As an LIDC, Nepal had limited money for strong buildings and emergency services.

Key Fact

Nepal 2015: magnitude 7.8, caused by the Indian Plate colliding with the Eurasian Plate. Around 9,000 people died, 600,000 buildings were destroyed or badly damaged, and about 3 million people were made homeless.

Consequences

Primary effects were severe. Around 9,000 people were killed and 23,000 injured. Around 600,000 buildings collapsed or were badly damaged. These included UNESCO heritage temples in Kathmandu’s Durbar Square. Roads and water pipes broke.

Secondary effects followed. The shaking triggered avalanches on Mount Everest, which killed 19 climbers. Nearly 8 million people were affected. Outbreaks of cholera and dysentery spread in the camps where displaced people lived. The economy lost an estimated $7 billion — about a third of Nepal’s GDP.

A loss of $7 billion would be serious anywhere. In Nepal it equalled about a third of the whole economy. That left less money to rebuild homes, repair roads and pay for health care. Damage to heritage sites such as Durbar Square also mattered, because these places are part of the country’s culture and attract visitors. This is a strong link to the Dynamic Development topic: disasters can push an LIDC further back on its development journey.

Responses

Immediate responses relied heavily on international aid, because Nepal’s own emergency services were quickly overwhelmed. Search-and-rescue teams flew in from India, China, the UK and the US. The UN, the Red Cross and Oxfam supplied tents, food, clean water and medical care. Helicopters were the only way to reach many mountain villages where roads were blocked.

Long-term responses were slower. Donors pledged $4.1 billion at a conference in Kathmandu. However, delays meant that two years later most rural homes were still not rebuilt. The government worked with the World Bank to set new earthquake-resistant building standards, but these were enforced unevenly in remote areas.

The immediate response saved lives, but it depended on other countries. The long-term response had money promised, yet rebuilding stalled. New building standards were a sensible step, because weak buildings caused most deaths. But a rule only protects people if it is followed. Uneven enforcement in remote villages means many families may still live in homes that could collapse in the next earthquake.

How Can Technology Save Lives?

We cannot stop earthquakes. But we can reduce their impact. This is called mitigation. The specification focuses on three types of technology: building design, prediction and early warning systems. Japan is a useful example because it is an AC in a very active tectonic area, so it has invested heavily in all three.

Building Design

Most earthquake deaths come from collapsing buildings, not from the shaking itself. Earthquake-resistant design tackles this directly. Steel frames and reinforced concrete hold buildings together. Timber frames can be designed to flex rather than snap. A base isolator is a rubber pad under a building that absorbs shaking, so less movement reaches the floors above. In Japan, modern buildings are designed to sway and survive. In Nepal, brick and mud-mortar homes had no such protection.

Prediction

Scientists cannot yet predict the exact time and place of an earthquake. What they can do is monitor plate boundaries and map where earthquakes are most likely. These hazard maps help governments decide where to build, where to enforce the strictest building codes and where to plan emergency supplies. Prediction is the weakest of the three technologies for earthquakes, so it works best alongside the other two.

Early Warning Systems

An early warning system uses sensors to detect the first, weaker waves of an earthquake. It then sends alerts before the strongest shaking arrives. The warning may only be seconds long. In Japan, alerts go out to phones, television and radio. Those few seconds let people take cover, let trains slow down and let factories stop dangerous machinery. Nepal did not have a system on this scale in 2015.

Key Fact

Technology mitigates tectonic hazards in three ways: building design stops collapse, prediction shows where risk is highest, and early warning systems give people seconds to take cover. Japan, an AC, uses all three; Nepal, an LIDC, had far less.

Technology has a positive impact, but it is not a perfect fix. It costs money, so LIDCs like Nepal struggle to afford it. Building codes only work when they are enforced and inspected. Early warnings give only seconds, and people must know what to do when the alert sounds. Older buildings may not meet new standards. So the best results come when technology is combined with education, planning and wealth.

The Nepal case study shows that the plates cause the shaking, but people’s buildings, wealth and preparation decide how many die. Technology can narrow that gap, but only where countries can afford it and enforce it.

Exam question

AI feedback
This is a guide, not an exam mark. If your teacher marks it differently, go with your teacher.

Next lesson Back to unit
Explainer